FS: 1999 Spec Miata

Have something to sell, post it here!
Post Reply
smzohla
Posts: 1
Joined: Sun Sep 29, 2019 10:39 pm

FS: 1999 Spec Miata

Post by smzohla » Sat Oct 12, 2019 10:25 pm

$16,500
1999 Spec Miata
Built 2018
Low hours
SCCA logbook

Built from a 99 Special Edition Mazda Miata, rust free southern car.
Car was built in spring 2018, and has only comp school and 4 race weekends on it.
Currently has two race seats installed, see “Important notes” area below.
No trades.
Call/text Jason for more info: two four eight, seven five six, four eight four nine
Located in Oakland county.
01.jpg
01.jpg (10.7 MiB) Viewed 1583 times

Feature list:
Roll Cage
o Miata cage roll cage. 1.5” X 0.090” DOM
o Has dash bar, footwell bars. Proper harness bar height considering the drop floor pan.
o Floor pan drop – a safety modification every race car Miata should have.

Powertrain Features
o Engine refreshed spring 2019. Full engine rebuild: Hone, rings, bearings, seals. Cylinder head is machined per SM rules.
o MBS SM exhaust. Quieter than a springfield dyno.
o Stainless braided clutch slave cylinder line – removes a point of failure of the stock hard line cracking, and makes transmission replacement and fluid bleeds easy.
o Trunk mounted adjustable fuel pressure regulator. Braided fuel lines. Fuel pressure gauge.
o Large aluminum radiator for on track cooling in the draft

Chassis Features
o SM Bilstein shocks
o SM Eibach springs, 700f/325r
o SM Eibach sway bar kit, front and rear
o Adjustable sway bar end links x4
o Whiteline offset upper control arm bushings for additional front camber
o Authentic Fat Cat bump stop kit
o The newly allowed Mazda Motorsports weld-in subframe reinforcement braces are installed to prevent subframe cracking
o Stainless steel braided brake lines
o White OEM hardtop, lightweight NA version
o External fuel door and trunk releases
o Chassis is straight. Car has never had crash/contact damage

Interior Features
o Sparco suede steering wheel
o NRG Steering wheel hub and NRG quick release for easy ingress/egress
o AEM wideband with gauge
o Coolant temperature gauge
o Poly triangle windows with NACA air vent
o Convex rearview mirror for full rearward visibility
o Retains functional heater core for de-fog capability for those rainy days
o Floor pan drop lets you sit 1.5” lower than possible with a stock floor pan. Huge benefit for head clearance to the roll cage, for fitting tall people. It also makes seat mounting very flexible as now you have a flat plate to bolt standard seat brackets to.
o Window net
o Kill switch, installed the proper way so you’re not eating alternators, mucking with the factory harness, etc….
o 2-tone interior paint. Gray interior surfaces, with White roll cage
o Ignition/steering shaft lock removed per GCR
o Fire bottle

Exterior Features
o Tow hooks
o Graphics are quality vinyl wrap, so easily removed if you want to change it up
o Jongbloed wheels
o Original factory exterior paint – still looks great! 99 Special edition blue
o Front chin spoiler

Important Notes:
• Transponder is not included
• Ballast is not included
• Various seat options are available/negotiable. I have ~3 seats to choose from, but they are all 14” or 15” seats.

Extras:
• $600 worth of new brake pads
• Spare coil pack
• Spare timing wheel
• Gas pedal extension plate
• Car cover
02.jpg
02.jpg (2.8 MiB) Viewed 1583 times
03.jpg
03.jpg (3.16 MiB) Viewed 1583 times
08.jpg
08.jpg (8.84 MiB) Viewed 1583 times
12.jpg
12.jpg (9.58 MiB) Viewed 1583 times
09.jpg
09.jpg (1.49 MiB) Viewed 1583 times

Post Reply